Understanding aggregate sizes: what 3/4, 10mm and 7mm stones mean

3 min readUpdated

Stone is sold by nominal size. Here is how to read names like 3/4, 10mm and 7mm, and what to confirm before you order.

Aggregate is described by size

Aggregates such as stone and gravel are described by the size of their particles. A stone sold as 3/4 refers to a nominal size of about 3/4 of an inch, which is roughly 19 mm. Stones sold as 10mm or 7mm are smaller.

The word nominal matters. A load is a mix of particles around that size, not a pile of identical pieces.

Why size matters

The size of the stone affects how it packs together, how it drains and how it finishes. Larger stone is often used where bulk and drainage matter. Smaller stone is often used where a tighter, finer finish is wanted.

For concrete, the right aggregate size depends on the mix design and the thickness of the element being cast. That decision belongs to your contractor, designer or engineer.

What to confirm when you order

Before ordering, check these points with your supplier:

  • The nominal size you need, as written in your plans or quote
  • The quantity, measured in cubic metres
  • Current availability and delivery arrangements for your site

Common questions

Is 3/4 stone the same as 19mm stone?
Nominally, yes. 3/4 of an inch is about 19 mm. Because size is nominal, a load contains pieces around that size, so confirm what you are getting when you order.
Which stone size is right for concrete?
It depends on the mix design and the thickness of the element being cast. Ask your contractor, designer or engineer. This guide does not recommend a mix.
Does Normlee sell 3/4, 7mm and 10mm stones?
The products page lists all three with published prices. Prices and availability are confirmed when you enquire.

Ready to ask about an order? See the materials and published prices, read how delivery works, or use the contact details.

This guide gives general information only. It is not engineering or design advice, and it does not state a specification for any Normlee product. Follow the advice of your designer, engineer or contractor for your project.

Related guides

Questions about your order?

Ask us about materials, delivery and quantities for your project.