Estimating material quantities in cubic metres

3 min readUpdated

How to work out the volume of material for a layer or area, and why you should allow for settling and waste.

The basic calculation

Most bulk materials are measured in cubic metres (m³). For a rectangular area, multiply the length by the width by the depth, all in metres.

For example, an area 5 m long and 4 m wide, filled to a depth of 0.1 m, is 5 × 4 × 0.1 = 2 m³.

Allow for the real world

Loose material settles and compacts once it is spread and rolled or tamped, so you may need more than the calculated volume. Some material is also lost in handling. Ask your contractor how much extra to allow for your job.

Bricks are counted, not measured

Normlee lists bricks per 1,000. The number you need depends on the size of the bricks and the walls you are building, so ask your builder for a count.

Check your estimate

The price calculator on the products page multiplies a published price by the quantity you enter. It does not work out how much you need. Use it once you have your quantity, then confirm everything with us.

Common questions

How many cubic metres are in a truckload?
It depends on the truck. Normlee has not published truck load sizes on this site, so ask when you enquire.
Does the price calculator work out how much I need?
No. It multiplies a published price by the quantity you enter. Work out your quantity first, then confirm everything with us.

Ready to ask about an order? See the materials and published prices, read how delivery works, or use the contact details.

This guide gives general information only. It is not engineering or design advice, and it does not state a specification for any Normlee product. Follow the advice of your designer, engineer or contractor for your project.

Related guides

Questions about your order?

Ask us about materials, delivery and quantities for your project.